ViaTerra Tundra V3 Waterproof Winter Gloves

Designed for long-haul riders who refuse to let the weather dictate their ride, the Tundra gloves offer a perfect blend of winter insulation, waterproofing, and premium protection. Built with 3M Thinsulate™ insulation, DryTerra™ Tech waterproof membrane, and SuperFabric™ reinforcement, these gloves ensure warm, dry hands in the harshest riding conditions, without sacrificing dexterity or bar feel.

From tackling freezing mountain passes to braving relentless downpours, the Tundra is your go-to cold-weather riding companion.

Features

Uncompromised Protection

Read more

Genuine 3M Thinsulate™ for Warmth Without the Bulk

Read more

All-Day Dryness

Read more

Enhanced Grip for Control in Wet Conditions

Read more

Integrated Visor Wiper

Read more

Touchscreen-Compatible Thumb & Index Finger

Read more

3M Reflectives on Fingers

Read more

Glove Clip Attachment

Read more

Dual Secure Closure for a Locked-In Fit

Read more

Stretch Panels for Freedom of Movement

Read more

Extra durability where it matters most

Read more Uncompromised Protection

Winter gloves shouldn’t just keep your hands warm, they should also keep them protected in case of a slide.

SuperFabric™ reinforced palm panels with HD EVA padding for world-class abrasion resistance.

Hard polymer knuckle protectors with EVA foam backing to absorb impact.

Extended pinky-side reinforcement for added slide protection.

Genuine 3M Thinsulate™ for Warmth Without the Bulk

Cold hands reduce reaction time, these gloves keep you warm while maintaining dexterity.

Lightweight, high-performance 3M Thinsulate™ traps body heat without feeling heavy or restrictive.

Optimized insulation placement ensures warmth where you need it most, without reducing finger mobility.

All-Day Dryness

Nothing kills a ride faster than cold, wet hands, stay dry, stay comfortable.

Proprietary DryTerra™ waterproof membrane keeps rain and moisture out.

Full-gauntlet design with an extended cuff prevents water seepage, under your jacket sleeves.

Enhanced Grip for Control in Wet Conditions

Better grip means better control, especially in the rain.

Engineered silicone grip panels across the full palm & on the control fingers for superior throttle, brake, and clutch control.

Goatskin leather palm for exceptional durability.

Integrated Visor Wiper

Clear rain off your helmet visor while riding.

Touchscreen-Compatible Thumb & Index Finger

Stay connected without removing your gloves.

3M Reflectives on Fingers

Boost visibility in low-light conditions.

Glove Clip Attachment

Keep your gloves paired when off the bike.

Dual Secure Closure for a Locked-In Fit

Gloves that shift mid-ride can be a serious hazard, these stay put.

Wrist Velcro closure & gauntlet adjustment strap ensure a snug, secure fit.

Pull-tabs on both closures for easy adjustment with gloved hands.

Stretch Panels for Freedom of Movement

Winter gloves don’t have to feel stiff, these flex where they should.

Strategic stretch accordions on fingers & backhand for unrestricted lever operation.

4-way stretch fabric for better fit and movement.

Extra durability where it matters most

The control fingers (index and middle) feature an additional layer of reinforcement, reducing wear from frequent use of the brake and clutch levers. This enhances durability while maintaining flexibility and comfort for long-term performance.

Specification

Material

Protection

Comfort and Fit

How to Measure Glove Size

How to Check Glove Fitment

Care and Storage

Things to Remember

Legal Metrology Data

Material

Designed for cold, wet rides, the Tundra v3 uses abrasion-resistant goatskin leather on the palm for a reliable grip and natural flexibility. The outer shell combines heavy-duty 4-way stretch fabric with SuperFabric reinforcement on the palm and pinky edge for added durability. Inside, 3M Thinsulate insulation provides warmth without bulk, while the DryTerra waterproof membrane keeps your hands dry in rain, slush, or snow. Silicone grip zones and touchscreen-compatible fingertips round out the utility.

Protection

Winter shouldn’t mean compromising on safety. Tundra v3 packs in hard polymer knuckle protectors backed with EVA foam for impact absorption, SuperFabric slide panels to resist abrasion, and extended reinforcement on the pinky edge for added crash protection. The dual-layered control fingers minimise long-term wear from repetitive lever use - making these ideal for high-mileage winter touring. CE-certified and designed for real-world riding conditions.

Comfort and Fit

Built to stay comfortable in tough weather, the Tundra v3 features stretch panels across the fingers and back of hand for easy mobility - even when layered over inner liners. The pre-curved fit eliminates bunching, while the full-gauntlet cuff and dual Velcro closures give you a snug, secure fit whether worn under or over a riding jacket. Memory foam lining and smart insulation placement ensure you get warmth and flexibility in all the right places - without any stiffness.

How to Measure Glove Size

Step 1 – Measure Your Hand
Grab a tailor’s measuring tape and take two quick measurements:
Circumference – Wrap the tape around the widest part of your palm. Lightly close your hand before noting the number.
Length – Measure from the tip of your middle finger to the base of your palm (where your wrist starts).

Step 2 – Check the Size Chart
Match your measurements with the size chart to find the right fit.
If your length and circumference fall in different size categories, go with the larger one.
If you're in between sizes, try both and pick the one that feels better on the bike.
A good fit means better control, less fatigue, and max protection, don’t guess it.

How to Check Glove Fitment

STEP 1 - Confirm that the gloves are a comfortable fit.
They should not be excessively tight on all fingers (including the thumb) & knuckles.
To check this, try the gloves on and form a fist several times and verify if:
1. Adequate room for all fingers (specially thumb) to move and operate controls comfortably.
2. Check the fitment on both hands since your left and right hand sizes do vary.
Ensure that the fit on first try is not so tight as to cause discomfort and/or restrict movement

STEP 2 - Ensure the knuckle protectors are properly positioned.
The way to check this is:
1. Roll your hand into a tight fist and hold the position for 5-10 minutes. This position should be easy to hold without causing any discomfort or causing any stress points.
2. Ensure that the edge of the knuckle protector is not over the knuckle when the fist is formed."

Care and Storage

Cleaning Your Gloves
What you’ll need:
Microfiber cloth, soft-bristled brush, absorbent towel, pH-neutral leather cleaner, leather conditioner, lukewarm water

Steps:
Mix a bit of leather cleaner with lukewarm water.
Dip the microfiber cloth, wring it slightly, and gently wipe the gloves clean.
Mud splatters? Let them dry first, then brush them off before wiping.
Work from wrist to fingertips, getting between each finger.
Rinse your cloth often so you’re not rubbing dirt back in.
Flip and repeat on the other side.

Important:
No hot water.
No harsh cleaners, fuel, fabric softener, or scrubbing.
No machines or pressure washers.
Don’t wring them.

Drying Wet Gloves
Gently press with an absorbent towel, do this even if it’s just rainwater.
Let them dry naturally, indoors, away from sunlight and heat.
Never use a dryer, radiator, or direct sunlight.
While drying, wear them occasionally to keep the shape.

Conditioning the Leather
Once dry, condition them. This keeps the leather flexible, breathable, and crack-free.
Use a good leather conditioner - nothing that clogs the pores.
Rub it in evenly and let it soak.
Wipe off any extra

Storing Your Gloves
Only store when completely dry.
Use a breathable cotton bag - skip plastic.
Keep them in a cool, ventilated place.
Take care of them, and they’ll take care of you on every ride.

Things to Remember

1. The Tundra v3 is designed for winter and wet-weather rides - it's not ideal for hot or humid conditions.
2. Always wear the gloves under your jacket cuff to prevent water seepage and maintain waterproof effectiveness.
3. The insulation may feel snug initially - ensure you can operate levers and controls without restriction.
4. Always dry the gloves thoroughly after wet use - storing them damp can cause mildew and long-term material damage.

Legal Metrology Data

Product name: TUNDRA v3 – WATERPROOF/WINTER MOTORCYCLE GLOVES
Name of the commodity: Motorcycle Apparel
Manufactured/Imported By: ViaTerra Travel Gear Pvt Ltd,
OS-2, Opp H-18, MIDC Satpur, Nashik 422007
Country of Origin: Indonesia
Price, wherever mentioned, is MRP and inclusive of all taxes

For customer complaints and support, email or call us:
Customer Care Contact: 88866 51324
Email ID: help@viaterra.in

Frequently
Asked Questions

• Are Tundra v3 gloves suitable for winter touring and daily rides?

  Yes, the Tundra v3 waterproof motorcycle gloves are designed for cold and wet-weather conditions, making them ideal for winter touring and daily use. With 3M Thinsulate insulation, DryTerra waterproofing, and SuperFabric reinforcement, they offer both warmth and safety on long rides.

• Are Tundra v3 gloves completely waterproof?

  Yes, the proprietary DryTerra membrane used in the Tundra V3 waterproof motorcycle gloves ensures complete waterproofing. Pairing the gloves under your rain jacket’s cuff will seal out water effectively even in heavy downpours.

• Can I use Tundra v3 gloves with my phone or GPS?

  Yes, the Tundra v3 winter motorcycle gloves features touchscreen-compatible panels on the thumb and index fingertips - perfect for using your phone or navigating with GPS without removing the gloves.

• Are Tundra v3 motorcycle gloves breathable despite being insulated?

  While the Tundra v3 motorcycle gloves are built for warmth, the use of 3M Thinsulate ensures breathability by trapping body heat without bulk. The design maintains comfort during long rides in cold climates without overheating.

• Can I wear Tundra v3 motorcycle gloves under or over my jacket cuff?

  The full-gauntlet design with dual Velcro closures on the Tundra V3 winter motorcycle gloves allows the gloves to be comfortably worn under your rain jacket cuff to block water from entering.

• Are Tundra v3 gloves warm enough for cold weather?

  Yes, the Tundra V3 winter motorcycle gloves are insulated with genuine 3M Thinsulate, designed to trap body heat without adding extra bulk. The insulation is placed strategically to ensure warmth while balancing control and finger mobility.