ViaTerra Miller Urban Riding Gloves

Designed for everyday riders who demand comfort, protection, and breathability, the Miller gloves are built for city commutes and weekend rides alike. With a lightweight, high-flex construction, reinforced impact protection, and optimized airflow, they deliver the perfect balance of comfort and safety for navigating urban streets.

Whether you're weaving through traffic or cruising through the city, the Miller keeps your hands cool, protected, and ready for the ride.

Features

Lightweight Protection for Everyday Riding

Read more

All-Day Comfort & Superior Fit

Read more

Optimized Ventilation

Read more

Enhanced Grip for Confident Control

Read more

On-the-Go Convenience

Read more

Built for Quick Wear & Secure Fit

Read more

Extra durability where it matters most.

Read more Lightweight Protection for Everyday Riding

City streets demand quick reactions, these gloves keep your hands safe without slowing you down.

Hard plastic knuckle protector with EVA foam backing absorbs impact.

Hard palm slider with EVA padding provides slide protection in case of a fall.

TPR finger protectors with memory foam padding offer additional safety without restricting movement.

All-Day Comfort & Superior Fit

Comfortable gear is the best gear, these gloves feel like a natural extension of your hands.

Pre-curved fingers ensure a natural grip on the bars.

Stretch textile & mesh construction for lightweight flexibility.

Velcro wrist closure with pull-tab for a secure, customized fit.

Optimized Ventilation

Stuffy gloves can make city rides unbearable, Miller keeps your hands cool & dry.

Perforated textile & mesh panels on the back of the hand and between fingers for maximum airflow.

Breathable micro-suede palm wicks away moisture while maintaining durability.

Enhanced Grip for Confident Control

Better grip, better control, no need to squeeze the bars too hard.

Super Grip silicone panels on the palm & thumb improve bar feel and throttle control.

Textured micro-suede palm ensures a secure grip in all conditions.

On-the-Go Convenience

Stay connected without taking your gloves off. Smart touchscreen-friendly panels on the index finger & thumb for effortless phone & GPS use.

Built for Quick Wear & Secure Fit

Get in and out of your gloves faster, no hassle, no fuss.

Cuff pull-tab for easy wear & removal.

Standard ViaTerra glove clip keeps both gloves together when not in use.

"

Extra durability where it matters most.

The control fingers (index and middle) feature an additional layer of reinforcement, reducing wear from frequent use of the brake and clutch levers. This enhances durability while maintaining flexibility and comfort for long-term performance.

Specification

Material

Protection

Comfort and Fit

How to Measure Glove Size

How to Check Glove Fitment

Care and Storage

Things to Remember

Legal Metrology Data

Material

Made for the daily grind, the Miller gloves feature a lightweight stretch mesh shell that lets your hands breathe through long rides. The palm is crafted from soft, durable micro-suede for excellent grip and abrasion resistance, while SuperGrip silicone panels on the thumb and palm give you added control in stop-and-go traffic. Touchscreen-compatible tips on the index finger and thumb let you stay connected without taking your gloves off.

Protection

Don’t let the lightweight feel fool you - these gloves are built to shield you in city spills. A hard plastic knuckle protector backed with EVA foam absorbs impact, while a reinforced palm slider protects during slides. TPR finger protectors lined with memory foam give you extra coverage without compromising flexibility. Added layers on the index and middle fingers reduce wear from repeated brake and clutch use.

Comfort and Fit

The Miller is designed to disappear on your hands. Pre-curved fingers follow your natural grip, while the stretch mesh and textile shell flexes with every move. A Velcro wrist closure with a built-in pull tab ensures a secure, snug fit every time. Easy to slip on, easy to wear, and easy to love on long commutes or quick errands.

How to Measure Glove Size

Step 1 – Measure Your Hand
Grab a tailor’s measuring tape and take two quick measurements:
Circumference – Wrap the tape around the widest part of your palm. Lightly close your hand before noting the number.
Length – Measure from the tip of your middle finger to the base of your palm (where your wrist starts).

Step 2 – Check the Size Chart
Match your measurements with the size chart to find the right fit.
If your length and circumference fall in different size categories, go with the larger one.
If you're in between sizes, try both and pick the one that feels better on the bike.
A good fit means better control, less fatigue, and max protection, don’t guess it.

How to Check Glove Fitment

STEP 1 - Confirm that the gloves are a comfortable fit.
They should not be excessively tight on all fingers (including the thumb) & knuckles.
To check this, try the gloves on and form a fist several times and verify if:
1. Adequate room for all fingers (specially thumb) to move and operate controls comfortably.
2. Check the fitment on both hands since your left and right hand sizes do vary.
Ensure that the fit on first try is not so tight as to cause discomfort and/or restrict movement

STEP 2 - Ensure the knuckle protectors are properly positioned.
The way to check this is:
1. Roll your hand into a tight fist and hold the position for 5-10 minutes. This position should be easy to hold without causing any discomfort or causing any stress points.
2. Ensure that the edge of the knuckle protector is not over the knuckle when the fist is formed.

Care and Storage

Cleaning Your Gloves
What you’ll need:
Microfiber/ soft cloth, Small bowl or mixing cup, Absorbent towels, Soft-bristled brush, Diluted cleaning solution, Lukewarm water

How to clean & dry gloves?
1. Clean the gloves as soon as you are able to, after your off-road session. This will make removing any stains easier. Leaving the gloves un-clean will make removing any stains tougher.
2. In a small bowl or measuring cup, mix a portion of diluted cleaning solution in lukewarm water.
3. Dampen a microfiber cloth with the mixture and gently wipe the stained areas. If there are stains which you are unable to remove using a damp cloth, use a soft bristled brush soaked in a mild pH neutral soap and rinse off using cold water. Please note that using a stiffer brush could lead to piling which will not be covered under warranty.
4. Clean the gloves starting at the wrist and working toward each fingertip. Be sure to clean well between each finger. Keep moving to a clean area of the cloth as the dirt is transferred.
5. Rinse the cloth often as the dirt is transferred. Turn the gloves over and repeat on the other side.
6. DO NOT USE HOT WATER
7. Do not use detergents, fabric stain removers, bleach or any chemicals for cleaning.
8. Do not wash the gloves in a washing machine.
9. Dip dry the gloves after cleaning in a ventilated area away from direct sunlight.
10. Do not wring the gloves.

How to store?
When gloves are stored wet or in a non-ventilated area, this may cause deformations and ruin your gloves, not to mention this allows mildew to grow on the leather causing discoloration and damage.
1. Make sure that your gloves are completely dry before you store them.
2. Place them in a breathable cotton bag to protect them from dust but with enough air circulation to prevent mildew from forming.
3. Store them in a cool, dry, well ventilated area

Things to Remember

1. The Miller is designed for daily urban use - it’s not built for highway crashes or aggressive off-road rides.
2. Textile and mesh materials offer breathability but will show wear faster than full-leather gloves.
3. A close fit at first is normal - just make sure you can comfortably grip the bars and operate all controls.
4. Keep Velcro away from the mesh panels to prevent fraying over time.

Legal Metrology Data

Product name: MILLER – URBAN MOTORCYCLE RIDING GLOVES
Name of the commodity: Motorcycle Apparel
Manufactured/Imported By: ViaTerra Travel Gear Pvt Ltd,
OS-2, Opp H-18, MIDC Satpur, Nashik 422007
Country of Origin: Indonesia
Price, wherever mentioned, is MRP and inclusive of all taxes

For customer complaints and support, email or call us
Customer Care Contact: 88866 51324
Email ID: help@viaterra.in

Frequently
Asked Questions

• Are the Miller gloves suitable for highway or off-road riding?

  No. The Miller urban riding gloves are designed for daily urban commutes and city use. They’re lightweight and breathable, but not intended for high-speed highway crashes or off-road impacts.

• Do the Miller gloves offer touchscreen compatibility?

  Yes! The Miller –urban riding gloves comes with touchscreen-friendly index finger and thumb panels, so you can use your phone or GPS without taking your gloves off.

• Will the Miller urban riding gloves feel tight when new?

  A snug fit at first is normal with the Miller – Urban Riding Gloves. The pre-curved design and stretch mesh will break in quickly, just make sure you can comfortably operate levers and controls right from the start.

• Are the Miller urban riding gloves breathable for Indian weather?

  Absolutely. The combination of stretch mesh, perforated panels, and moisture-wicking micro-suede used in the Miller urban riding gloves keeps your hands cool and dry, even during stop-and-go rides in hot city traffic.

• How should I clean and care for the Miller urban riding gloves?

  Wipe the Miller Riding Gloves with a damp cloth and use a soft brush for stubborn dirt. Let them air dry indoors, never use direct heat or machine wash. Store them in a cool, dry place in a breathable bag for the best longevity.