A tailor’s tape works best. A string and ruler is fine too.
Product photos. Hover the main image to zoom.
Furious CE Gloves V2.0 (Neon)
You save ₹0 · Inclusive of all taxes.
You can review size, colour and quantity in your cart before checkout.
No warrantyNo warranty is included with this listing.
No documented manufacturer warranty is provided with this listing. Helmet Hub does not offer a separate warranty. Your statutory rights remain unaffected.
Product details
Clear gear information to help you compare protection, care and fit.
Riding Gloves, Furious CE Gloves V2.0 (Neon)
Our flagship pair combining racing level protection and touring level comfort, the Furious CE gloves. Full grain high quality goat leather is soft yet extremely durable, with a thickness of 1.2 to 1.5mm. Knox™ SPS 404 sliders on the palm and Super fabric™ slider for the pinky finger raises the safety aspect.
Improvements for 2023 -
- Knuckle impact protection test passed for CE Level 2
- Cuff length test passed for Level 2
- Super fabric type changed for better slide safety
- Internal changes for better dexterity and comfort
- New silicone printing pattern for slightly improved grip
- Free rain over gloves in the package
The whole glove is CE approved to standard EN 13594:2015. The Furious gloves pass following tests
- Knuckle Impact Resistance : Residual force below 5kN (CE Level 2 requirement)
- Test for cuff length ≥ 50mm ( CE Level 2 requirement)
- Abrasion resistance: Slide time ≥ 4 seconds.
- Cut resistance on palm: ≥ 1.2N (Newtons)
- Seam strength: Main seams ≥6kN per millimeter.
- Tear strength: on palm ≥ 25N and back hand ≥ 18N (Newtons)
The gloves thus pass CE level 2 requirements for Knuckle Impact protection and Cuff length, while being overall approved to CE level 1 standards.
Impact and abrasion safety –
- Full wrap Knox™ SPS 404 sliders for the palms, made from a layer of Knox’s latest Micro-lock armour on the inside and abrasion-resistant LDPE on the outside
- Super fabric™ for the outer side of pinky finger
- Full Wrap wrist protection offers higher safety by raising the entire profile of the gloves to protect wrist bone during crash impacts
- Double cuff closure
- Level 2 knuckle protector in a separate overhanging part for maximum comfort
- Hard protectors for proximal phalanges (fingers)
- Hard protectors for outer phalange of thumb, soft foam inside leather for inner phalange
- Soft foam under leather for intermediate phalanges (fingers)
Abrasion safety –
- Thick and durable yet dextrous and supple goat leather chassis.
- Pinky-finger bridge between 3rd and 4th finger.
- Leather reinforcements on the palm and outer hand landing zones provide maximum abrasion resistance for key impact zones.
Fit and comfort –
- Twin strap hook and loop closure.
- Touch sensitive finger-tip.
- Palm-grip printing.
- Stretch panels for flexibility.
- Pre-curved design for comfort.
- Full-gauntlet, touring fit.
Weather safety -
Comes with a free Solace rain over gloves in the package.
Made in Indonesia
NOTE: PRODUCT IS NOT WATERPROOF / WATER-RESISTANT
__PRESENT__PRESENT__PRESENT
__PRESENT
__PRESENT
__PRESENT
__PRESENT
__PRESENT
Check the listed size, construction and delivered manufacturer instructions before use.
- Manufacturer catalogue vendor
- Solacegears
- Product type
- Long Gloves
- size
- S
- Manufacturer options
- S
Declared standards
Certification and batch labels should be verified on the delivered product and packaging. Use only standards declared for the exact product, size and market.
How to inspect product labels →Care basics
- Clean the shell with mild soap and water only.
- Air-dry the liner away from direct heat.
- Do not modify, drill or repaint the shell.
- Replace after a significant impact even if damage is not visible.
How it should feel
New cheek pads should feel snug and move the skin when the helmet moves. The helmet should not rotate freely, create a concentrated pressure point, or obstruct vision.
Fit checks
- Measure horizontally above the eyebrows and around the widest point.
- Start with the chart; model shape and hair can affect fit.
- Wear the helmet for 10–15 minutes indoors before removing labels.
- Confirm the retention strap can be correctly secured.
Helmet size guide
Wrap around the widest part of your head, above ears and eyebrows.
Take the largest reading and match it to the chart.
| Size | Head circumference (cm) |
|---|---|
| XS | 53–54 |
| S | 55–56 |
| M | 57–58 |
| L | 59–60 |
| XL | 61–62 |
| XXL | 63–64 |
General guide only. Shell shapes and sizing vary by brand, check the brand’s own chart where available.
Bike compatibility
Bike-independent / not model-specific
Not tied to a specific bike model. Check the size, intended application and any material or grade requirements in the product instructions.
Shipping
Contact support with your PIN code for current delivery availability and timing. Orders over the displayed threshold may qualify for free standard delivery.
Read shipping information →Size / colour exchange eligible
Eligible for a size or colour exchange under the product terms. Manufacturer warranty and wrong or damaged-item replacements are assessed separately under the published policy.
Read the exchange policy →No warranty
No warrantySolace
What this means
No documented manufacturer warranty is provided with this listing. Helmet Hub does not offer a separate warranty. Your statutory rights remain unaffected.
Questions about your order? We can help with invoice and order records.
Contact Helmet Hub Replacement policyRider reviews
Experiences shared by riders, published after approval.
No reviews yet.
Share your experience with this product. Your review will be published after approval.
No reviews yet.
Product Q&A
Quick answers on protection, fit and exchange checks.
How do I choose the right riding gear size?
Compare your measurements with the current manufacturer chart and check your normal riding posture.
What should I check on delivery?
Check the model, size or format, finish, condition and included components before use.






